Knowledgebase: NAS Management
I can't config the N3200 from web page, how could I do?
Posted by - NA -, Last modified by Victor Chen on 19 November 2010 15:23
If we can't config the N3200 from web page, we could via Thecus Setup Wizard to config the IP and creat RAID volume, following steps for your refence:
  1. Confirm the IP adress on your PC is manualy assigned, not DHCP.
  2. Plug the network cable from NAS WAN(LOWER) port to PC direcly.
  3. In order to access NAS WEB interface, please change PC'IP address to segment.
  4. Power up NAS, when press button with beep sound, after 1~2 mins later until power up complete with another beep sound.
  5. Install the Thecus Steup Wizard V2.0.4 or newer version,
  6. Confirm Thecus Setup Wizard doesn't been blocked from Windows, as attach file for your reference.
  7. Refer to N3200 user's manual page 14 to config N3200 IP address and RAID volume.

Date: Nov 19, 2010
(854 vote(s))
Not helpful

Comments (0)